Your Address : Globalchemmade--ETS Intarlaken Technologies, Kolkata
Name:ETS Intarlaken Technologies, Kolkata
Type:Others
Tel:+(91)-(33)-25770637/25772260
Fax:
Address:Indonesia
Equipments detail
| Equipment: | Electrical Compression Testing Machine |  |
| Equipment Type: | Instrument -> Test Instrument | |
| Unit Type: | ||
| Technical Parameters: | ||
| Post Time: | 2010-11-26 | |
| Main Features: | ||
| Usage: | ||
| Description: | Electrical Compression Testing Machine We manufacture electrical cum hand operated compression testing machine which is a hydraulic, electrically operated unit and is designed for compression tests on concrete specimens up to 20 cm. diameter (or width and depth) and 30 cm, in height and also for rocks and various other materials. It can also undertake cold crushing strength (CCS) test. Our equipment consists of a best grade steel cross head and cast iron base with two pillars connecting the base and cross head by means of nuts. It has a hydraulic jack which is fixed to the base. The upper platen has got a self aligning action and is attached to a screw which passes through the cross head and can be raised or lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin Loading is accomplished by the upward movement of the lower platen. The motorized pumping unit is of plunger type and is connected to the jack by means of a steel connecting tube. A maximum red pointer Is provided to facilitate taking of the readings after failure of specimens. The pressure gauges of 20 cm dia. With isolating valves are fixed on the pumping unit at an angle for easy readability. The machine is fitted with control which enables the rate of application of load to be varied. The machine is equipped with facilities for hand operation as well. The electrical pumping unit is fitted with three micro switches one for each pressure gauge and will switch off the machine automatically as the load on the machine approaches its full capacity of the gauge in case the isolating valves are not operated. This will protect the pressure gauges and the whole unit so that in case of break down of power supply, the machine will stop and will not restart unless the starting switch is operated. | |